Hairdrer, Hair Curler, Hair Roller manufacturer / supplier in China, offering Hair Drying Accelerator of Hairdryer Stand or Hanging, Wholesaler Hair Salon Furniture Salon Beauty Barber Chair, Red Color Hair Washing Chair&Bed Unit for Salon Shop and so on.
|Min. Order:||50 Pieces|
|Payment Terms:||T/T, Western Union, Paypal|
|Transport Package:||Standard Export Carton|
. Function introduction:
Flying saucer Hairdryer has multiple functions including color, perm, treatment and hairdressing. It has special, novel and distinguished design of appearance, fully showing its own characteristics The rotate function ensures even distribution of heat, to reach better and significant effect .
. Control Panel:
1. power switch
2. Rotate setting
3. Temperature setting
4. Time setting
A. Temperature display
B. Time display
C. Rotate display
. Operation steps:
Step 1: Switch on power
Step 2: Set the time
Step 3: Set the temperature
Step 4: Rotate setting
. Operation directions:
1. If the Flying Saucer is incorrectly positioned, it will not work perfectly.
2. After the power is switched on, the time display will be flashing, indicating that the Flying Saucer is ready for operation.
3. Regulate the heating level and time according to the requirement of hairstylist or your personal need.
4. When the time preset reaches the end, the electronic buzzer wil give alarm, indicating that the operation is completed, If further operation is required, please restart the machine.
. Operation directions :
1. Flying Saucer are made of complicated electronic parts similar to a computer, which will be easily damaged under poor atmospheric condition, such as in a damp outdoor condition or under direct sunshine in summer. Avoid expose the machine to extremely hot or cold condition.
2. Power socket of 5A and over is required for Flying Saucer . Please use the correct power socket. Do not share a socket with other equipment.
3. Do not hold the power cord to plug off power. Hold the insolating part of plug to plug off power.
4. Do not wet the Flying Saucer . Dry your hand before touching the keys on the control panel. Keep the Flying Saucer dry.
5. Except for emergency, do not stop or pull the circular heater by hand.
6. Do not move and lift up the machine by holding the circular heater, which will damage the components.
7. Insert the Slide pipe into the support pipe and ensure the dryer top over the slide pipe facing the longer side of the foot stand, lift up or push down the slide pipe to adjust the height required an tighten the regulator.
1. use dry and soft rag to clean the plastic, mesh and painted surface.
2. Use a rag with neutral detergent to remove stubborn dirt .
3. Use neutral detergent only.
4. It is forbidden to use other solvent such as thinner, gasoline or petrolatum album to clean the machine otherwise it will damage the machine .
1. Rating voltage: 110V/60Hz or 220V/50Hz
2. Rating Power: 950W
3. Type of electric shock proof protection: 1